In the following situations, the user must manually install the device driver manually.
[ If you need to manually install the QEEG-64FX device driver ]
1) PC is not connected to the Internet.
2) There is a problem with the automatic installation process depending on the user’s
PC environment and the Internet environment.
An example of a problem situation.
– The drive installation process (screen below) is automatically completed within one minute after the QEEG-64FX is connected to the PC, but the driver installation does not take more than five minutes to complete. If this situation is occur, Device Drivers should be manually installed.
[ How to Install QEEG-64FX Device Drivers Manually ]
– The following procedure can be performed only once on a PC, using the device.
Step1. State of QEEG-64Fx’s USB not connect to PC.
Step2. Disable automatic installation function of device driver on PC.
Step3. QEEG-64FX Device driver install manually.
Step4. After Step3), When QEEG-64FX is connected to PC via USB, normal recognition
of QEEG-64FX is handled on PC.
Step5. Return the settings that were disabled in Step2) to the original state.
– To restore User PC environment to its original state.
[ Detail of Step2 and Step3 ]
Detail of Step2 . Disable automatic installation function of device driver on PC.
[ How to disable automatic installation function of device drivers in Windows 7 ]
[Start – Right click on the computer – Properties], the system window will pop up as
Click System Settings on the left side of the system window to open the System
If you click the [Hardware – Button “Device Installation Settings]” tab in the System Properties window, the device installation settings will appear as shown in the figure below.
Select the option “No, I will choose the task myself” and select the red box with the detailed options “Do not install the driver software on Windows Update.”
[ How to disable the automatic installation fucntion of device drivers in Windows 8 / 8.1 / 10 ]
Click the [Start – Right click on the computer – Properties], the system window will pop up as shown below. Click on “Advanced System Settings” on the left side of the system window and the “System Properties” window will appear.
Select “No” in the “Device Installation Settings” (shown below) by clicking the button device installation setting in the above picture, and save the changes.
Detail of Step3 . How to install the device driver manually.
Device Driver Installer program : CDMxxxxx_Setup.exe(xxxxx is the version number and the number may vary from installation to installation.)
Device driver installer program path : TeleScan installer path -> folder LXDeviceAPI_Utility -> Driver -> LXDeviceStream
(As shown in the figure below, the path that is visible in Windows Explorer)
Double click “CDMxxxxx_Setup.exe” to execute.
Click “Extract” Button on the first screen.
Click the Next button.
Select “I Agree” and click the “Next” button.
Click the “Finish” button.
Step3. When finished, connect QEEG-64FX to PC and QEEG-64FX will be recognized automatically from PC.